Starting relay


STARTING RELAY TYPE RTZ
 
 
Experience, quality, reliability
Relay starter type RTZ (hereinafter - the relay) is designed to run hermetic refrigeration compressor.
Technical characteristics
1.Rele designed to operate from AC power at nominal voltage (230 ± 22) and frequency (50 ± 1) Hz.
Compressor start relay provides voltage deviates on relay terminals at the time of start-up to minus 16% of the lower limit of the rated voltage range.
2. Power consumption 0.5W.
3. Permissible output load is not more than 10 A AC.
4. While the relay is in the range from 0.4 to 1.0.
5. The relay is resistant to the maximum power (500 ± 5) AC.
6. Weight relay than -20 g
7. Overall dimensions of the relay are shown in figure 1.
Figure 1
8. The relay provides reliable starting the compressor for 160,000 cycles.
9. Average life of the relay - 10 years.
10. The relay does not contain precious metals.
 
Safety requirements
1. Relay for electrical safety requirements meets STB IEC 60335-1-2008.
Class of protection against electric shock: a relay control device built into a Class I.
Creepage distances and clearances correspond STB IEC 60335-1-2008 for pollution degree 2, Installation category (overvoltage category) II.
2. Zaschityobolochkirele degree IP 20 according to GOST 14254-96.